Spiral Paperclip

		These simple spiral paperclips are an ideal project to get started with. You will need: Straight nose pliers Round nose pliers Wire cutters Tape measure Steel or brass wire Cut a 6 inch length of wire. Use a pair of round nose pliers to bend a spiral starting at each end of the wire and working towards the middle. Ideally the two spirals should press tightly against one another where they meet.
		next project
design Allen McDermott Contact Wire Magic Website © Copyright 2005 Wired 4 Art
Content of this page compiled by Michael Ball.

These simple spiral paperclips are an ideal project to get started with.

You will need:

Straight nose pliers
Round nose pliers
Wire cutters
Tape measure
Steel or brass wire

Cut a 6 inch length of wire. Use a pair of round nose pliers to bend a spiral starting at each end of the wire and working towards the middle. Ideally the two spirals should press tightly against one another where they meet.

next project

design Allen McDermott Contact

Content of this page compiled by Michael Ball.